The mobile and fixed filtration units are used on the external circuit of the tank
DELTA ZETA PAK
The DELTA ZETA PAK mobile and/or fixed units use depth filters with lenses. The available flow rates are 5-10-15-20 l/min.
The absorption of the filter media of the depth filters and the low flow rate make it possible to efficiently remove both “hard” contaminants and “soft” contaminants (sludge), as well as the products in varnish that cause thermal degradation and oxidation. The filter elements also stabilise the ideal level of contamination and keep it constant even during heavy-duty use.
The elements have a large filtering surface and an excellent capacity for retaining contaminants, and so can be used for a long time before they need to be replaced, making the Becodisk Unit both versatile and cost-effective.
Thanks to a patented removal system, the elements of the depth filters can be replaced quickly and in a simple and safe manner.
DELTA ZETA DRI PAK
The mobile or fixed DELTA ZETA DRI PAK version with flow rates of 5 to 20 l/min uses filter elements that can remove both solid contaminants and water.
In order to reduce critical levels of solid contaminants, the filter unit of the version with dual filter can absorb up to 11 litres of water in oil.
The double removal capacity makes the DELTA ZETA DRI PAK perfect for controlling contamination in hydraulic and lubrication systems prone to the infiltration of water and solid contaminants.
The DELTACART filter units have pleated particle filter elements with a large filtering surface and a removal capacity of 5, 7, 12 and 22 um Bx>10000. The choice of filter element depends on the class of contamination to be attained.
Since DELTACART is a corrective and maintenance system where the time factor determines the quality and efficiency of operation, it is advisable to use B5>1000, B7>1000 filter elements. The cart can have a flow rate of 50 to 200 l/min. The fixed versions of Deltacart are available in a version with single filter or with multi-container, to meet all operating requirements with regard to large volumes to be treated or the guarantee of a long service life of the filter elements.
The flow rates available are 50 to 500 l/min.
The unit can be supplied as a “modular” one with shut-off valves and check valves for each valve, and 1 to 4 containers in line which can be tailored to specific requirements. If the temperature needs to be controlled in addition to the level of contamination, the system is supplied with an oil-air heat exchanger suited to the characteristics of operation and to the temperature of the fluid to be reached and maintained.
DELTAHANDLE PORTABLE UNITS
The DELTAHANDLE portable unit is equipped with a pump of 5 or 10 l/min. The system is highly versatile and suitable for treating small volumes of oil, control units with volumes of 200 l or less. It weighs just 20 kg and is, therefore, easy to handle and carry.
The unit uses a spin-on type filter with a removal capacity of 5, 7, 12 or 22 um, BX>1000.
EATON OIL PURIFIERS
EATON oil purifiers that can remove free, emulsified and saturated water.
Flow rates of 30 and 70 l/min.
The two versions of the purifier can remove 22 and 54 litres of water per day, respectively.
The viscosity range covers lubricating oils of up to 700 cst. The purifier has a 3 or 6 kW heater that facilitates the removal of water at low temperatures or at a high viscosity.