Fluid sampling

Sampling the lubricating fluid is an important way of identifying the correct information of the circuit.

The sampling methods used can often further contaminate the sample of fluid. As a result, the cleanliness of the fluid is wrongly interpreted and the effectiveness of any measures taken is compromised. We make the sampling process simpler, repeatable, safe and reliable, in the interest of proactive control of the contamination of fluid.


The PUSH BUTTON sampling valve makes it possible to sample the fluid in repeatable conditions of cleanliness. There is no need to remove any of the fittings. It is simply necessary to install the valve at a point of the system where a representative sample of the fluid can be taken, and to press the button for the time required to fill the container. The sampling pump is a valid, clean and simple solution for the correct and reliable sampling of oil from the tank or the gearboxes. All you need to do is immerse the plastic pipe (provided with the pump) in the tank, screw the container onto the pump and use the vacuum created in the pump to sample the fluid.
Fluidcare CORREZIONE valvola campionamento 1
Fluidcare CORREZIONE Vacuum Pump
The D101 containers can be adapted to the sampling vacuum pumps and purchased separately.
Scroll to Top